1. Wipe the sensor window clean. Rubbing alcohol and a microfiber cloth are recommended.

1. Switch the unit off for 5 seconds, then switch the unit back on.

Lightly pull the rubber spout to wipe any dried residue.

3-4 hours or until a solid white light is displayed.

A solid white light indicates the unit is fully charged and displays when the unit is powered on. A pulsing white light indicates the unit is charging. A solid red light indicates the unit low on charge.

The air vent cutout might be clogged. Gently wipe any soap residue from around the white seal under the lid.

Pump needs to be reset:

1. Press and hold the power button for 5 seconds.

1. Wipe the sensor lens clean. Rubbing alcohol and a microfiber cloth are recommended.

1. Press the power button for 2 seconds to turn on the unit.

1. Completely cover the sensor window and tap the power button quickly 3 times (within 2 seconds). Note that this will make the pump run continuously until the sensor window is uncovered. Watch our video on how to continuously dispense.